Truebite.com
TRUEBITE, INC.
2590 Glenwood Road
Vestal, NY 13850-2936
TOLL FREE: 1-800-676-8907
PHONE: 1-607-785-7664
FAX: 1-607-785-2405
EMAIL: truebite@truebite.com
Home Page. TrueBite.com Removing Broken Bolts and Studs Tile Drilling & Degrouting Glaze, Stone, Glass Etching & Engraving Printable Order Form

Glaze, Stone, Glass Engraving and Etching

Etching and Engraving Sub-Menu:
  1. Beginner's Guide to Glaze & Glass Etching.
  2. Glaze & Glass Engraving Kit.
  3. Other Etching and Engraving products.

TrueBite Etching and Engraving Products

ENGRAVING BITS
Engrave in porcelain, glaze or metal. 1/8" shank.
 
#6032 Medium Ball
Outlining and some shading.		 $12.00
#6176 Diamond Shader
Frosting edges, defining points.		 $15.00
#6033 Small Ball
For very fine detailing (ex: facial features, eyes, mouth, very fine lines).		 $12.00
#9032 Small Engraving Stone
Shading solid in larger areas.		 $4.95
#6175 Engraving Set $34.95

#6175 Set of all four
DIAMOND BITS FOR ENGRAVING PORCELAIN, GLASS, GLAZES, METAL
 
#6020 Flame Detail, filling patterns. $7.95
#6021 Larger Ball Preparatory work, outlining, stippling, sectioning. $7.95
#6022 Spear Shading, used to obtain a uniform white surface in glass. $7.95
#6023 Small Ball Fine engraving lines, contours. $7.95
#6024 Football Shading, hatching. $7.95

 
Above diamonds require 1/16" collet #482 to fit Dremels and other motor tools.
 
#6025 Set of Five $29.95
#482 Collet 1/16" $3.50
 
  • Create detailed designs through an underglaze without chipping. Paint ceramic bisque black and engrave into bisque. The white bisque will show through, revealing the pattern.
  • Fine detail cutting, scraffito, carving, and engraving on wood, glass, ceramic glaze and bisque, porcelain, jade, and hard woods.
  • Engrave porcelain (china) plates. Etch your designs free hand or use a pattern. To use a pattern, first place graphite paper on the plate. Place the pattern on top of the graphite and then tape it down in place. Using a pencil, trace the pattern. Remove the paper and you will have your pattern ready to etch.
  • Etching with the diamond bit on the flexible shaft offers excellent control & flexibility.
SMALL ENGRAVING STONES
For fine, more detailed decorative work.
 
  • The smaller grinding surface allows the stone to do finer, more exacting decorative work.
  • The glass engraving set consists of 4 smaller sized stones than contained in the ceramic set.
  • This set is often ordered for delicate work on ceramics.
#9030 Small Engraving Stone Set $13.95
  Any Individual Size $4.95
DIAMOND BALL
  • Remove stilt marks or excess glaze accurately without scratching surface.
  • Remove stilt marks without removing glaze.
  • Large size will bevel fired porcelain.
  • Make indentations on porcelain or ceramic to adhere jewelry.
  • All four sizes engrave glass and porcelain.
  • Use as a tool for scraffito to work.
#6033 Small Ball $12.00
#6032 Medium Ball $12.00
#6031 Large Ball $12.00
#6030 Extra Large Ball $12.00
#6035 Set of Four $39.95
TIPS:
  • Use a few drops of water to prolong diamond life
  • Use top of ball to gently touch stilt.
DIAMOND CORE DRILL SET
  • Make holes to hang suncatchers.
  • drill small holes in porcelain, glass, tile, glazes without chipping or cracking.
  • Drill doll earing and breast plate holes, wind chimes, jewelry, ornaments.
#6052 59Thousands 1/16" (1.55mm)
(smallest of the three bits)		 $12.00
#6053 78Thousands 5/64" (2.05mm) $12.00
#6054 118Thousands 1/8" (3.15mm) $12.00
#6055 Core Drill Set
(one of each above)		 $29.95
BRASS BUSHING
  • 1/4" to 1/8" top quality brass bushings.
  • 1/4" shank fits standard woodworking routers.

 
#9200 Brass Bushing $2.95

#9200
CORDLESS TWO-SPEED KIT
  • Portable unit frees you from a cord.
  • Fully charges in 3 hours; runs continuously for 30 to 45 minutes.
  • Unit does not require air to be drawn in or blown out to keep the motor tool cool. Therefore, no dust is blown into the face or lungs of the operator or collected in the motor.
  • Two speed: 7,500 and 15,000 rpm
Retail value: $82.00
 
#7700 Cordless Dremel Kit
Includes 7.2 volt, 2 speed multi-pro tool, charger, storage case, and 25 Dremel accessory bits.		 $54.95

#7700
CORDLESS MINI-MITE
  • Designed for precision drilling, sanding, shaping, and detailing.
  • Small and compact, the Mini-Mite goes anywhere, anytime and is both fun and easy to use.
  • Includes tool, 1/8" collet, removable battery pack, 3-hour charger, and five Dremel bits.
Retail value: $54.60
 
#750 Cordless Mini-Mite $34.95

#750
MINI-MITE BATTERIES
  • Removable, interchangeable battery pack for continuous use.
#755 Mini-Mite Battery 4.8v $15.95
#757 Mini-Mite Battery
(more powerful)
For Cordless Two-Speed #7700		 7.2v $19.95
  • Fully charges battery pack in three hours.
  • Plugs directly into any standard 120V AC outlet.
  • Features a LED charging indicator light.
#756 Mini-Mite Battery Charger Unit 4.8v $9.95
#758 Mini-Mite Battery Charger Unit
For Cordless Two-Speed #7700		 7.2v $9.95
© 2006 Truebite®, Inc. All rights reserved.